Selectronic SP PRO 2i Series, Instruction Manual

Page: 75 / 113

SP LINK | Performance Monitoring
Doc #OI0005 Rev26 2020
|
75
STATUS
Output Mode: The mode in which the SP PRO is running, such as
Idle, On or Synchronised
Generator Status – Available, Not Available or AC Present.
Generator Started By: The reason the generator has started such
as high load.
Generator Running Reason: The reason it is still running If you feel
that the generator has been running too long this is the area to check.
AC Load Power: The power being taken by the loads in kW. When
Generic AC coupled Solar is installed this reading becomes the load
power less any generic AC coupled solar power.
AC Load Voltage: The AC voltage being delivered to the load
AC Load Frequency: The frequency of the AC voltage being
delivered to the load.
If the Attention indicator is flashing on the front panel, check the
Attention Required area to find out the cause.
For further information see “Appendix One Alert Messages” on page
98 .The table in this section outlines all the
SP PRO
ALERT type event
messages, the most likely cause and possible remedies.
See Appendix One Alert Messages on page 98
Data View
If you require more detailed data about the system clicking on Data View opens a screen containing
comprehensive data about the SP PRO and the system
Now Tab
The Now tab gives you live information about what is happening to the system now.