2-34
Installing Paper on Winder (Option)
A paper winder unit is available as an option. It winds roll paper
for storage without cutting it.
Use the paper winder unit as follows:
1
Insert the winding scroller into the paper tube.
2
Install the scroller with the paper tube in the winder.
Scroller
Paper tube
3
Raise the lever, insert paper from the paper feed side
scroller through the paper feeder, lower the lever, and
feed paper from the Feed menu on the operation panel
(see Section 3, Menu Operation (Feed Menu)) until
paper can be wound.
Paper feeder
Paper delivery unit (rear)
Winder
NOTE
-
Use a paper tube which has same paper width as paper
feed side’s one.
If using a wider paper tube than paper feed side, paper
winding error may occur.