2-12
Replacing the Paper Roll
This section describes how to install a paper roll on the scroller,
remove it from the scroller, install a paper roll on the printer, and
remove it from the printer.
A paper roll is replaced in three cases:
- If a paper roll is replaced with another
- If it is replaced when it runs out
- If it is replaced when it jams
A paper replacement procedure in each case is explained below.
I nstalling Paper Roll on the Scroller and Removing it from the Scroller
1
Remove the left flange from the scroller.
2
Remove the paper roll from the scroller.
3
Attach a new paper roll to the scroller.
- Install the paper roll in the direction shown above.
- Be careful not to damage the edge of the paper roll when
inserting it.
- Install the paper roll on the scroller or remove it from the
scroller laterally on the table. Do not stand the paper roll to
install or remove it on / from the scroller to avoid paper skew
due to slackness of the paper roll.
- Install paper roll on the scroller after whisking away dust
covered on the side and print surface of the paper roll.
Paper roll
NOTE
Paper roll
Left flange
Scroller
The right flange is fixed
to the scroller.