manualshive.com logo in svg

Seiko IP-4010, User Manual, Page: 43 / 156

Share
Download
Seiko IP-4010 User Manual Download Page 43

1-19

Section 1  Getting Started (Basic knowledge)

LCD Messages and Printer State

This section explains the messages shown on the LCD and outlines

menu operations.

Messages on the LCD

(1) Initialization display

The printer is being initialized.

      - SCSI controller

Booting

- Network controller

INITIALIZING

WAIT A MOMENT

SYSTEM VERSION

01A

(When the printer is installed for the
first time, it prompts an IP address.
For details, see the User's Guide
(Function Settings).)

*: When the system starts normally, both controllers go online and enter idle mode

automatically.

(2) Online state (idle mode) display

The printer can receive data from the computer.

- SCSI controller

- Network controller

PRINT READY

ROLL : 54” (COATED)

PRINT READY

SXXX

ROLL : 54” (COATED)

Status display

Paper information

Status display

  SXXX: Number of jobs to be processed

Paper information

INITIALIZING

WAIT A MOMENT

Summary of Contents for IP-4010





























































































































































Reviews:

No comments