manualshive.com logo in svg

Seiko IP-4010, User Manual, Page: 46 / 156

Share
Download
Seiko IP-4010 User Manual Download Page 46

1-22

NEST PRINT

S001

X01 2_HPGL

J001

NESTING

S000

nnnn   sec

Nesting wait state

When the 

 key is pressed in the nesting

wait state, nesting can be stopped and printing

can be performed.

(7) Online state (nest mode) display

The printer is in the nesting wait state.

- SCSI controller

- Network controller

(8) Online state (nest print mode) display

The printer is nest-printing.

- SCSI controller

- Network controller

NEST PRINT

*S001

X01 2_HPGL

J001

Copy information is not displayed during

nest printing.  The information about the first

nested job is displayed.

(9) Online state (remote operation mode) display

The printer is in remote control mode.

- SCSI controller

- Network controller

REMOTE

S000

When printing is stopped during remote

operation, this screen is displayed.  When

the remote operation ends, the LCD returns

to its original state automatically.

This state is not present.

This state is not present.

This state is not present.

Summary of Contents for IP-4010





























































































































































Reviews:

No comments