xii
Handling Precautions
Precautions Regarding the Power Supply
1. Install the printer near an easily accessible electrical outlet.
2. Do not provide power to the printer through the same power
line as for noise-generating devices, such as a motor.
3. The power supply voltage must be 100 VAC.
4. Connect the power cable to an electrical outlet. Do not plug
several devices into one electrical outlet.
Handling Precautions
1. Turn the power off, wait for at least ten seconds, and turn the
power on again.
2. Do not place anything on top of the printer. Do not rest your
elbows on the printer.
3. Open and close the top cover gently from the front of the printer
with both hands.
4. Before connecting or disconnecting the interface connector, turn
the printer off.
5. Do not clean the surface of the cover with benzene or paint
thinner. The coating may come off or deteriorate.
Wipe the cover clean with a soft cloth. If the cover is very dirty,
use a cloth moistened with a neutral detergent.
6. Do not touch the ink-jet head surface.