3-22
- DETAIL
: Prints a paper feed adjustment patten used for
getting a final most accurate correction value.
Press key during printing to stop the printing.
<Adjustment procedure>
See
3-35
page "2. FEED ADJ Pattern".
(3) Paper feed adjustment correction value (PAPER FEED ADJ)
Adjust the amount of paper feed according to the paper type. Enter
a correction value based on the print results of the paper feed ad-
justment pattern.
<Parameter (Enter a value.)>
xxx. xx % (99.0 to 101.00%)
<Adjustment procedure>
When using paper except coated paper with the engine-SCSI firm-
ware of which version is 1.10 or former or when using paper ex-
cept coated paper with the engine-SCSI firmware of which version
is 2.00 or later at first time, set “Paper feed adjustment correction
value” as follows:
• PET
: Correction value for coated paper
(or BASE*) +0.06
• Glossy Paper
: Correction value for coated paper
(or BASE*) +0
• Backlit Film
: Correction value for coated paper
(or BASE*) +0.06
• Polyester Cloth
: Correction value for coated paper
(or BASE*) +0.3
• Adhesive Vinyl : Correction value for coated paper
(or BASE*) +0.06
• Plain Paper
: Correction value for coated paper
(or BASE*) +0
The above correction values are just standard values.
Determine correction values by printing paper feed pattern if cor-
rection is not satisfied.