2-10
- SCSI controller
Booting
PRINT READY
ROLL : 54” (COATED)
INITIALIZING
WAIT A MOMENT
SYSTEM VERSION
01 A
If a 54" coated paper roll is used
PRINT READY
S000
ROLL : 54” (COATED)
If a 54" coated paper roll is used
When the power is turned ON for
the first time after purchasing the
printer, a guidance message is
displayed to prompt you to set an
IP address. (See the User's
Guide (Functions Settings) for
details.)
JOB CANCEL
YES
NO
When there is a job, this message
is displayed. When "NO" is
selected, a saved job can be
printed. If no key is pressed for
10 seconds, "NO" is selected
automatically.
- If the fan does not run or the operation panel lamp does not
light when the circuit breaker and power ON/OFF switch are
turned ON, the power supply may be faulty.
- If an error is detected during the self-diagnostic test at power
on, an error message appears on the LCD. See the Section
4, Troubleshooting and take appropriate measure.
HINT
- Network controller
INITIALIZING
WAIT A MOMENT