4-13
Section 4
T
roubleshooting
Description
: Paper runs out.
Measure
: Set new paper.
=> Section 2 Basic Operation (Paper Replacement)
Description
: Paper with an invalid size (A3 width or less or 54 inch
width or more) is set.
Measure
: Set paper with a correct size.
=> Section 2 Basic Operation (Paper Replacement)
Description
: Paper skews.
Measure
: Set paper correctly.
Ink may be attached to the platen according to skew
conditions. Wipe off ink on the platen.
=> Section 2 Basic Operation (Paper Replacement)
Description
: Paper is cut incorrectly.
Measure
: Remove the incorrectly cut part of the paper. Check
whether specified paper is used and set paper correctly.
=> Section 2 Basic Operation (Paper Replacement)
If this message is displayed frequently, replace the cutter.
=> Section 2 Basic Operation (Cutter Replacement)
LIFT LEVER
2
SET PAPER
LIFT LEVER
3
SET PAPER
LIFT LEVER
4
SET PAPER
LIFT LEVER
1
SET PAPER
When an Error Message Appears
LIFT LEVER
1
SET XXPAPER
XX: Paper Size (54", A0, A1...)
When using paper roll (Network Controller)
(Paper)
When using paper roll (SCSI controller)