2-2
Connecting with Computer
The method of connecting the printer with a computer depends on
the type of controller built in the printer.
This section describes each of the connection methods.
If the printer has a network controller, the IP address and parameter
settings for each port are requited after cable connection.
This section only shows system configurations and cable connec-
tion procedure. For information on parameter settings for each
port, see the separate "User's Guide (Function Settings)."
SCSI Controller
System configuration (connection example)
The following connection is possible.
Connection procedure
Connect a cable as follows:
1
Turn the printer and the computer OFF.
Printer
(Printer server PostScript RIP)
SCSI interface
NOTE
- When the printer is connected with the computer, turn the
printer ON, and then turn the computer ON. To turn the
system OFF, turn the computer OFF, and then turn the printer
OFF.