1-9
Section 1 Getting Started (Basic knowledge)
Precautions for handling prints.
-
Do not touch the print surface before drying up the ink.
Hold margins of the paper for handling.
Especially use care before 24hours after printing.
-
Rubbing print surface causes color fading or color transfer.
Do not pile print surface to prevent color transfer.
-
Do not pile with copy prints or laser prints to prevent sticking
due to ink or toner.
-
Do not rub, scratch, or hold the paper to prevent pealing.
-
Do not rub or leave the paper in wet condition to prevent blur-
ring.
Other precautions
-
Cloth and Vinyl (with glue) can not be cut with a built-in cutter.
-
Paper causes color fading and a change in quality in getting old.
Check paper condition and use good conditioned paper.
-
Joints of thread of the cloth may look white.
-
When using Backlit Film, put the print surface as the face and
give light from the back (film surface).
-
When using Vinyl (with glue), adhesive matter (glue) may be
sticked to the platen.
In that case, wipe up the adhesive matter referring to "Section
2, Daily Care".
Sticking of adhesive matter may cause paper jamming.
-
There is a case that an error is generated due to missing of paper
drop from the printer.
Remove the print after cutting to prevent such an error or set a
paper again after the error.
-
We recommend PET and Vinyl for coating the print.
PP (Polypropylene) coating may cause a trouble.
Check effectiveness before coating.
-
Paper dust due to cutting may cause float of coating.