1-19
▼
How to input an original
Chapter 1 Getting started
■
Removing the original width guide
If the return of the original is changed between front and rear exit
frequently, remove the original width guide in advance.
Hook your finger on the claw at the bottom and while opening the claw,
pull towand you, and the original width guide will be removed.
◆
Take care that you pull toward you. Pulling down on the
claw could damage the claw.
How to scan originals with a crease
If a creased original is scanned, switch the lever in advance.
1
Move the lever toward the rear of the device.
Open the scanner cover, and switch each lever on both sides toward the
rear.
Note
Lever
Lever
