Seiko I Infotech LP-1020-MF User Manual Download Page 173

Page: 173 / 176

6-9

Chapter 6 Troubleshooting

Color scanning function

The color cannot be scanned.

■

The color scanning is an optional feature, and requires a color

upgrade kit: LP840, LP-841, LP842 or LP843. Without this

kit, color scanning is not available.

➝

When using the color scanning function, insert the CF card for

color scanning to the plotter, and then power on. Do not remove

the CF card when the plotter is operating, nor use the CF card

with other equipment like PCs. Without the CF card, color

scanning is not available.

When scanning as color, select "color" for the TWAIN driver's

color mode, and then start scanning.

Summary of Contents for LP-1020-MF

















































































































































































Search results

Summary of Contents for LP-1020-MF

Reviews:

Related manuals for LP-1020-MF

Brands by name

Popular brands

Seiko I Infotech LP-1020-MF, User Manual

Search results

Summary of Contents for LP-1020-MF

Reviews:

Related manuals for LP-1020-MF

Brands by name

Popular brands