2-41
Chapter 2 Copy function
1
Press the [ORIGINAL] key.
If the [ORIGINAL] key is pressed, the screen
switches to the ORIGINAL setting screen.
2
Press the [ ] or [ ] key.
Press the [ ] or [ ] key to move to the “Partial
Copy (mm).”
3
Press the [Enter] key.
If the [Enter] key is pressed, the screen switches
to the Partial Copy setting.
4
Enter numeric value with the ten
keys.
For “Position”, enter the distance from the
original top edge to the copy start position
with ten keys. Numeric value can be entered
in a range of 0 mm to 10000 mm (0 to 393.70
inches).
Here, “50” is entered to “Position”.
*1 mm = 0.0394 inches
O r i g i n a l
S e r i e s
E j e c t D i r e c t i o n
S c a nMe d i a
P a r t i a l C o p y (mm)
P a g e : 0 1 / 0 1
[ E n t e r ]
t o S e l e c t
O r i g i n a l
S e r i e s
E j e c t D i r e c t i o n
S c a nMe d i a
P a r t i a l C o p y (mm)
P a g e : 0 1 / 0 1
[ E n t e r ]
t o S e l e c t
O r i g i n a l : P a r t i a l C o p y (mm)
P o s i t i o n : 0
L e n g t h : 0
( 0 – 1 0 0 0 0 )
[ E n t e r ]
t o S e t
O r i g i n a l : P a r t i a l C o p y (mm)
P o s i t i o n : 5 0
L e n g t h : 0
( 0 – 1 0 0 0 0 )
[ E n t e r ]
t o S e t
▼
Partrial copy