2-42
5
Press the [ ] or [ ] key.
Press the [ ] or [ ] key to select the “Length”.
6
Enter numeric value with the ten keys.
Enter the length of original range to be copied
partially with ten keys. Numeric value can be
entered in a range of 0 mm to 10000 mm (0 to
393.7 inches).
Here, “100” is entered to the “Length”.
*1 mm = 0.0394 inches
◆
If the length is set to “0”, the partial copy is invalidated and
normal copy print is executed.
◆
Either of the following cases causes a copy error,
requiring extreme care.
- Numeric value of “Position” is larger than original size
- Total of “Position” and “Length” exceeds the maximum
original size that can be scanned
O r i g i n a l : P a r t i a l C o p y (mm)
P o s i t i o n : 5 0
L e n g t h : 0
( 0 – 1 0 0 0 0 )
[ E n t e r ]
t o S e t
O r i g i n a l : P a r t i a l C o p y (mm)
P o s i t i o n : 5 0
L e n g t h : 1 0 0
( 0 – 1 0 0 0 0 )
[ E n t e r ]
t o S e t
Note
