6-5
Chapter 6 Troubleshooting
Q.
Both side edges of an original are not copied when the China
series of original is copied. Or, a copy is taken with the margins
added to both sides.
A.
■
China size setting is not correct.
➝
Set the China size that matches the original and paper roll used
by referring to “If China series of paper is used” in Chapter 2 of
User's Guide, Plotter Unit prepared separately.
A.
■
Original width of China series does not match the paper roll
width of China series.
➝
Use the paper roll width of China series, matching the original
width of China series. Correct copy cannot be taken in case where
the original width is 914 mm (36 inches) and the roll width is 880
mm (34.6 inches).
Q.
The original position cannot be moved for copy, or original does
not move to the desired position. If an original is moved, part of
original is not copied.
A.
■
The ORIGINAL SIZE is set to AUTO.
➝
The MOVE function is disabled if the ORIGINAL SIZE is set
to AUTO. Set the ORIGINAL SIZE to any setting other than
AUTO (
⇒
page 2-7).
A.
■
The FrameErase/Offset is set to FrameErase.
➝
The offset function is disabled if the Frame Erase/Offset is set
to FrameErase/Offset. Set the FrameErase/Offset to Offset (
⇒
page 2-44).
A.
■
The moving amount is not affected by the scale setting.
➝
When moving the original, the moving amount is not affected
by the scale setting even if set. Set the desired moving amount
regardless of the scale setting.
A.
■
The Paper Feed Location is set to AUTO.
➝
If the Paper Feed Location is set to AUTO, the device selects
automatically the print paper according to the original size.
However, the moving amount is not taken into account when the
paper is selected, and as a result of movement, the original area
exceeding the paper size is not printed. To print all the moved
original, set the Paper Feed Location to any settings other than
AUTO (
⇒
page 2-28).
▼
Copy/scan cannot be performed satisfactorily