6-2
Copy/scan cannot be performed clearly
Q.
Streaks appear in the copy/scan result
A.
■
The shading guide or scanner glass is dirty.
➝
Clean the shading guide or scanner glass (
⇒
page 1-20).
◆
Copying/scanning the original stained with the toner, ink,
or dust makes the inside of scanner dirty. Remove stains
on the original before starting the copy/scan.
◆
When copying/scanning a long original, be careful that the
original does not touch the floor.
◆
Use a document carrier for copy/scan, if the stains on
original cannot be removed completely.
Q.
A fold of original appears on the copy/scan result.
A.
■
The shadow of a fold is read.
➝
Open the scanner cover and change over the levers on both
sides toward the rear and then retry to scan (
⇒
page 1-18).
➝
Change the original setting direction (turn 90˚, and then retry to
scan.
➝
Set the BACKGROUND REMOVAL to larger value (
⇒
pages
2-15, 3-18).
Q.
Back side of an original is seen through original and copied/
scanned.
A.
■
In case of a thin original, characters on the back are seen
through the original and may be read.
➝
Set the BACKGROUND REMOVAL to larger value (
⇒
pages
2-15, 3-18).
Note