Maintenance
TPG User Manual
99
6. Transfer the update file to the TPG:
Syntax:
put <name of update file> binfile
Example:
put tpg-10.1.3.bin binfile
7. Close the FTP connection:
quit
Dynamic Update via the TPG Homepage
Specify a directory on the file server for automatic (dynamic)
updates. The directory contains the current software files.
Requirements
;
The file server on which the software files are stored either uses
the anonymous login or the TPG is set up as user on the file
server.
Proceed as follows:
1. Start the TPG Homepage.
2. Select
Actions – Download Area
.
3. Select
Dynamic Firmware Update
.
4. Tick
Dynamic Firmware Update
.
5. Specify the IP address of the file server on which the new
software files are to be stored.
Syntax:
ftp://<file server IP address>/
<Software file name>
Example:
ftp://192.168.0.100/tpg-10.1.3.bin
(If your system supports name resolution via WINS, DHCP, or DNS, you can enter
the name of the file server instead of the IP address of the file server).
Example:
ftp://file.server.de/tpg-10.1.3.bin
6. If you use a proxy server, tick
Use proxy server
and enter the IP
address of the proxy server.
7. Click
Save
to confirm.
ª
The settings are saved. At each restart, the TPG verifies the
version of the software files. If the TPG detects a higher version,
this version will be installed automatically on the TPG.