Maintenance
TPG User Manual
100
Fig. 11: TPG Homepage - Dynamic Firmware Update
Dynamic Update via the InterCon-NetTool
Specify a directory on the file server for automatic (dynamic)
updates. The directory contains the current software files.
Requirements
;
The file server on which the software files are stored either uses
the anonymous login or the TPG is set up as user on the file
server.
Proceed as follows:
1. Start the InterCon-NetTool.
2. Mark the TPG in the device list.
3. Select
Actions
–
Firmware Update - Dynamic Update
from the
menu bar. The
Dynamic Update
dialog appears.
4. Tick
Dynamic Firmware Update
.
5. Specify the IP address of the file server on which the new
software files are to be stored.
Syntax:
ftp://<file server IP address>/
<Software file name>
Example:
ftp://192.168.0.100/tpg-10.1.3.bin
(If your system supports name resolution via WINS, DHCP, or DNS, you can enter
the name of the file server instead of the IP address of the file server).
Example:
ftp://file.server.de/tpg-10.1.3.bin
