SEH ThinPrint TPG120 User Manual Download Page 93

Page: 93 / 120

Maintenance

TPG User Manual

If the TPG is protected by a password, the password has to be ente-
red before resetting the parameters. Only by using the status button
of the TPG can the parameters be reset without entering the
password.

What do you want

to do?

’Resetting Parameters via the TPG Homepage’

’Resetting Parameters via the InterCon-NetTool’

’Resetting Parameters via an FTP Connection’

’Resetting Parameters via the TPG Status Button’

Resetting Parameters via the TPG Homepage

Proceed as follows:

1. Start the TPG Homepage.
2. Select

Actions – Default Settings

3. Click

Default Settings

The parameters are reset.

Resetting Parameters via the InterCon-NetTool

Proceed as follows:

1. Start the InterCon-NetTool.
2. Mark the TPG in the device list.
3. Select

Actions – Default Settings

from the menu bar.

4. Click

Finish

The parameters are reset.

Summary of Contents for ThinPrint TPG120

























































































































Search results

Summary of Contents for ThinPrint TPG120

Reviews:

SEH ThinPrint TPG120, User Manual, Page: 93 / 120

Search results

Summary of Contents for ThinPrint TPG120

Reviews: