Appendix - Parameter List
TPG User Manual
111
Table 10: Parameter List - TCP/IP
tp1_remote_queue
~
tp12_remote_queue
[Port]
max. 64 characters
lp1
Defines the LPD Queue name.
Is used when the LPD protocol
was selected as transfer
method between the TPG and
the printer.
tp1_remote_lpd
~
tp12_remote_lpd
on/off
off
Specifies the transfer method
between the TPG and the prin-
ter:
- on = LPD protocol
- off = Socket
monitor_ping
[Monitoring via
ping]
on/off
on
Enables/disables a periodical
’ping’ query to the remote
addresses of the assigned
printers.
The ’ping’ query allows you to
view status information about
the printer connection.
monitor_snmp
[Monitoring via
SNMP]
on/off
on
Enables/disables a periodical
’snmp’ query to the remote
addresses of the assigned
printers.
The ’snmp’ query allows you to
view printer messages.
monitor_poll
[Monitoring
interval]
1 - 6000
[4 characters, 0-9]
20
Defines the interval of an
’snmp’ or ’ping’ query in
seconds.
Parameters
Value
Default
Description
ip_addr
[IP Address]
valid IP address
000.000.
000.000
Defines the IP address of the
TPG.
ip_mask
[Subnet mask]
valid IP address
depends
on the IP
address
Defines the subnet mask of
the TPG.
ip_gate
[Gateway]
valid IP address
000.000.
000.000
Defines the gateway address
of the TPG.
ip_dhcp
[DHCP]
on/off
off
Enables/disables the DHCP
protocol.
Parameters
Value
Default
Description