manualshive.com logo in svg

SEH ThinPrint TPG120, User Manual, Page: 19 / 120

Share
Download
SEH ThinPrint TPG120 User Manual Download Page 19

Administration Methods

TPG User Manual

19

2.2

Administration via the InterCon-NetTool

The software InterCon-NetTool has been developed by SEH Compu-
tertechnik GmbH for the administration of SEH network devices
(print server, TPG, ISD, etc.). Depending on the network device you
can configure various features via the InterCon-NetTool.

The InterCon-NetTool has been designed for use in Windows, Mac
OS X, and Linux networks. The software is installed on all clients that
are meant to access a network device in the network.

Basic Functions

After the InterCon-NetTool is started, the network will be scanned
for connected network devices. The network range to be scanned is
freely definable. All network devices found will be displayed in the
'device list'.

You can modify the device list and adopt it to your individual needs.
You can mark and configure the devices in the device list.

Installation and

Program Start

In order to use the InterCon-NetTool, the program must be installed
on a computer with Windows, Linux, or Mac OS X operating system.
Different installation files are available, depending on the operating
system. You will find the InterCon-NetTool installation files on the
Product CD or on the Internet at www.seh.de.

If you use the InterCon-NetTool in Mac OS X or Linux networks,
some functions will notbe available.

Summary of Contents for ThinPrint TPG120

























































































































Reviews:

No comments