SEH ThinPrint TPG120 User Manual Download Page 34

Page: 34 / 120

Status Information

TPG User Manual

Configuring a ’ping’ Query via the InterCon-NetTool

Proceed as follows:

1. Start the InterCon-NetTool.
2. Double-click the TPG in the device list.

The

Properties

dialog appears.

3. Select

Configuration – ThinPrint®

from the navigation bar.

4. Tick

Monitoring via ping

5. Enter the interval (in seconds) into the

Monitoring interval

box.

6. Click

to confirm.

The settings are saved.

Displaying the Printer Connection Status via the TPG Homepage

Proceed as follows:

1. Start the TPG Homepage.
2. Select

Configuration – ThinPrint®

The printer connection status is displayed under

Status

and is

assigned to the printer IDs.

Displaying the Printer Connection Status via the InterCon-NetTool

Proceed as follows:

1. Start the InterCon-NetTool.
2. Double-click the TPG in the device list.

The

Properties

dialog appears.

3. Select

Configuration – ThinPrint®

from the navigation bar.

The printer connection status is displayed under

Status

and is

assigned to the printer IDs.

Summary of Contents for ThinPrint TPG120

























































































































Search results

Summary of Contents for ThinPrint TPG120

Reviews:

SEH ThinPrint TPG120, User Manual, Page: 34 / 120

Search results

Summary of Contents for ThinPrint TPG120

Reviews: