manualshive.com logo in svg

SEH ThinPrint TPG120, User Manual, Page: 47 / 120

Share
Download
SEH ThinPrint TPG120 User Manual Download Page 47

Network and Device Settings

TPG User Manual

47

4.4

How to Adapt the Network Speed

You can adapt the speed of the TPG to other network components,
such as switches or hubs. The 'Auto' mode is preset. The speed is
identified automatically and adapted to the other network compon-
ents.

If you set the speed manually, the speed must correspond to the
speed of the other network components. It is not possible to ope-
rate the TPG with full duplex if the hub is operated with half
duplex.

What do you want

to do?

†

’Adapting the Speed via the TPG Homepage’ 

Ö

47

†

’Adapting the Speed via the InterCon-NetTool’ 

Ö

47

Adapting the Speed via the TPG Homepage

Proceed as follows:

1. Start the TPG Homepage.
2. Select 

Configuration – General

.

3. Select the desired setting from the 

Ethernet settings

 list.

4. Click 

Save

 to confirm.

ª

The setting is saved.

Adapting the Speed via the InterCon-NetTool

Proceed as follows:

1. Start the InterCon-NetTool.
2. Double-click the TPG in the device list.

The 

Properties

 dialog appears.

3. Select 

Configuration – General

 from the navigation bar.

4. Select the desired setting from the 

Ethernet settings

 list.

5. Click 

OK

 to confirm.

ª

The setting is saved.

Summary of Contents for ThinPrint TPG120

























































































































Reviews:

No comments