manualshive.com logo in svg

SEH ThinPrint TPG120, User Manual, Page: 104 / 120

Share
Download
SEH ThinPrint TPG120 User Manual Download Page 104

Appendix - Glossary

TPG User Manual

104

10.1 Glossary

The glossary contains terms from the world of network technology.

What information do

you need?

 •  ’Hardware Address’ 

Ö

104

 •  ’TPG Default Name’ 

Ö

105

 •  ’IP Address’ 

Ö

105

 •  ’Host Name’ 

Ö

106

 •  ’Gateway’ 

Ö

106

 •  ’Subnet mask’ 

Ö

106

Hardware Address

The TPG is addressable by means of its world-wide unique hardware
address. This address is commonly referred to as the MAC or Ether-
net address. The manufacturer has defined this address in the hard-
ware of the device. The address consists of 12 hexadecimal numbers.
The first six numbers represent the manufacturer, while the last six
numbers identify the individual device.

The hardware address is found on the housing, the TPG Homepage,
the InterCon-NetTool, or the status page.

          

00:c0:eb:00:01:ff

 

Manufacturer
ID

Device
number

Hardware Address

Summary of Contents for ThinPrint TPG120

























































































































Reviews:

No comments