Maintenance
TPG User Manual
91
Downloading the Parameters File to one or more TPG using the
InterCon-NetTool
You can configure one or more TPG using the parameters file. For
this purpose, the file is downloaded to the TPG.
When downloading the parameters file to several TPG, the parame-
ter default settings 'IP address,' and 'Host name,' of the respective
TPG will be maintained. All other settings will be overwritten by the
ones in the new parameters file.
Proceed as follows:
1. Start the InterCon-NetTool.
2. Select one or more TPG from the device list.
3. Select
Actions – Download Parameters File
from the menu bar.
4. Click
Choose
. The
Parameter Download
dialog appears; see:
Fig. 9
Ö
90.
5. Specify the ’parameters’ file.
6. Click
Open
.
7. Decide on the password option:
If the TPG displayed in the list are not password-protected or
protected by different passwords, activate
Ask for each
password
.
If the TPG are protected by the same password, activate
Use
this password
and enter the password.
8. Click
Start download
.
By clicking 'Start download', the selected file will be downloaded
to all TPG displayed in the list. If you do not want to download the
file to all TPG, you must close the window and only select the
desired TPG from the device list (see step 2).
9. Confirm the security query.
10. Enter the password(s), if necessary.
ª
The parameters file will be downloaded to the TPG. The TPG
parameters will be configured in accordance with the file.