manualshive.com logo in svg

SEH ThinPrint TPG120, User Manual, Page: 36 / 120

Share
Download
SEH ThinPrint TPG120 User Manual Download Page 36

Status Information

TPG User Manual

36

The following information is shown in the Job History:

Information

Description

Status

Status of the print connection. The following statuses are 
possible:
• 'Completed' means that the TPG has completely forwarded the 

print job to the printer. 

• 'Pending' means that the print job has been accepted by the 

TPG but that the data transfer has not yet started. 

• 'Processing' means that the print job has been transferred from 

the TPG to the printer. 

• 'Processing stopped' means that the data transfer to the printer 

has been stopped. This can occur if, for example, the printer 
ran out of paper. If the printer error is fixed, data transfer will be 
resumed. 

• 'Aborted' means that the print job has been aborted. This can 

occur if, for example, the TPG has been restarted while the 
print job was processed.

Protocol

Protocol used to transfer the print data

Name

Name of the print job

Sender

IP address of the sending host

Size

Size (in KB) of the print job. The minimal size that is displayed is 
1 KB.

Printer ID

Identification number of the printer that has spooled the print job

Creation time

Time at which the print job has been sent to the TPG.

Duration

The time needed by the TPG for processing the print job. The 
minimal duration that is displayed is 1 second.

Summary of Contents for ThinPrint TPG120

























































































































Reviews:

No comments