SEH ThinPrint TPG120 User Manual Download Page 80

Page: 80 / 120

Certificate Management

TPG User Manual

2. Select

Configuration – Certificates

3. Select

TPG certificate

4. Enter the required parameters, see: Table 7

78.

5. Click

Create certificate request

The creation of the certificate request is in progress. This may
take a few minutes.

6. Save the request in a text file.
7. Send the text file as certificate request to a certification

authority.

When the CA certificate has been received, it must be saved in the
TPG; see: ’How to Save CA Certificates in the TPG’

81.

Creating a Certificate Request via the InterCon-NetTool

Proceed as follows:

1. Start the InterCon-NetTool.
2. Mark the TPG in the device list.
3. Select

Actions – Certificate – Server certificate

from the menu

bar. The

Certificate

dialog appears.

4. Tick

Create certificate request

5. Click

Next

6. Enter the relevant parameters, see: Table 7

78.

7. Click

Next

. The parameters are listed.

8. Confirm by clicking

Next

. The creation of the certificate request

is in progress. This may take a few minutes.

9. Save the request in a text file.
10. Send the text file as certificate request to a certification

authority.

When the CA certificate has been received, it must be saved in the
TPG; see: ’How to Save CA Certificates in the TPG’

81.

Summary of Contents for ThinPrint TPG120

























































































































Search results

Summary of Contents for ThinPrint TPG120

Reviews:

SEH ThinPrint TPG120, User Manual, Page: 80 / 120

Search results

Summary of Contents for ThinPrint TPG120

Reviews: