44
|
MAGIQTOUCH & MAGIQCOOL MODELS
Regular servicing of an evaporative cooler is
essential in maintaining proper performance
and reliability. There are numbers of areas that
need to be routinely checked. It is important
to note that all evaporative coolers have some
consumable items such as filter pads, fan
belts, water pumps and bearings etc., which
deteriorate under normal operating conditions,
and therefore require periodic replacement.
The frequency of service is largely dependent
on the conditions under which the cooler is
operated. External factors, such as air and
water quality, can affect the serviceable life
of the cooler and its components. Similarly,
the amount and type of use can also have a
significant impact. The guidelines listed below
are intended to provide help in formulating
a proper service regime. Local, and in some
cases individual factors should be taken into
account when deciding on the frequency of
visits.
For access to Technical/Installation/Service
Information register online at:
www.seeleyinternational.com/service
DEFINITIONS
Clean
- To wash and/or remove all dirt, grit or
debris.
Replace
- To remove the existing item and
replace with a specified genuine replacement
part.
Check/Inspect
- To visually inspect the item
for correct operation, fitment and functionality.
Adjust
- To test and make adjustment or
alterations as required to meet set appliance
specifications.
EXTERNAL INSPECTIONS
□
Inspect external components, including pad
frames, tank and lid assemblies for any
damage or deterioration.
□ Inspect dropper duct, flashing, support
frames and roof cladding etc for any signs of
corrosion.
□
Inspect and test water supply stopcock for
correct operation and leakage.
□
Inspect and test electrical isolation switches
(GPO’s, Circuit Breakers and fuses in meter
box) for correct condition and operation.
SEASONAL MAINTENANCE
PROCEDURES AND CHECKS
SWITCH PLATE CONTROL
The MagIQtouch Switch Plate Controller is a
simple to use control that controls an individual
MagIQtouch cooler.
SWITCH CONTROLLER FUNCTIONS
COOL - Pump ON/OFF
FAN - Fan ON/OFF
FAN SPEED - Potentiometer
ON
ON
OFF
OFF
COOL
SPEED
INTERNATIONAL
AIR
ILL2141-A
100m
max
100m
max
100m
max
100m
max
EVAPCOOLER
EVAPCOOLER
EVAPCOOLER
EVAPCOOLER
ON
ON
OFF
OFF
COOL
SPEED
INTERNATIONAL
AIR
ON
ON
OFF
OFF
COOL
SPEED
INTERNATIONAL
AIR
ON
ON
OFF
OFF
COOL
SPEED
INTERNATIONAL
AIR
ON
ON
OFF
OFF
COOL
SPEED
INTERNATIONAL
AIR
INDIVIDUAL CONTROL
ILL2216-A
ILL2216-A
