SEELEY INTERNATIONAL
- SERVICE GUIDE
|
11
CONTROLLER OR SYSTEM
RESET
Note!
Resetting the whole system will mean
that every component connected to the
wall control will be given the factory default
address. After resetting a whole system it
will be necessary to go through the ‘System
Installation Wizard’ again from the start.
ILL1596-B
ILL1632-A
It is possible to reset the whole system
(including all connected components) or the
controller only.
Use a pin or paperclip to press and hold
the reset button located at the back of
the controller. Make sure the controller is
connected to the cooler and the power supply
to the cooler is turned on.
This will cause the following screens to appear:
Some settings are protected by an access
code to prevent customers changing important
parameters
The access code is 7378.
ILL2126-A
