Seeley coolair Braemar Breezair MaglQcool Service Manual Download Page 51

Page: 51 / 68

SEELEY INTERNATIONAL

- SERVICE GUIDE

TECHNICAL BULLETIN:

A01/12 SEELEY SERVICE MEMO

Subject: Seeley Service & Spares Web Resource

Bulletin Number: A01/12

Region: Australia
Author: Technical Support 1300 650 399

Date: 8/01/2012

TECHNICAL BULLETIN

In September of 2011 we launched the

Seeley

Service Web

resource

(link below). This site

contains a large library of Seeley International

Service/Installation/Technical and Spare parts

information. To access this information you will

need to go:
www.seeleyinternational.com/service/
Brands and information covered on web site:
Breezair - Braemar Heating and Cooling -

Haier - Tudor Romeo

• Latest Service Information

• Technical Bulletins

• Parts Lists

• Service Guides

• Installation Manuals

• Instruction Flyers for various Spare parts kits

•

Product Specifications

Spare Parts Web Site

Seeley International officially launched it’s the

Spare parts web site in January 2013. The web

site provides Seeley International’s customers

with online access to detailed spare parts

information, to aid in identifying and ordering

Seeley International spare parts for Braemar,

Breezair, Coolair and Convair products.
This web site is available to the General Public

/ Spare Parts Distributors / Service Agents /

Dealers and Installers, and aims to improve

customer service, as well as promote the use

of genuine spare parts.
The web site includes details about spare

parts, spare images, descriptions, compatible

models, replacement parts if obsolete,

exploded diagrams and the functionality to

be able to search by almost any aspect of the

spare part required.
It also allows you to easily add spare parts to

a “list”, select a spare parts distributor near

you and send them an email order with the

part information and quantity. The spare parts

distributor will then get in touch to discuss

pricing, arrange payment and delivery of the

order.
The new spare parts web site is accessible

on the Seeley International web site under

the

“GET SUPPORT”

menu, and under the

“SPARE PARTS”

sub menu, or at this web

address:
www.seeleyinternatinal.com/get-support/

spare-parts/

Seeley International has a policy of

continuous improvement in all areas. This

is one of the many product improvements

and enhancements that we are making

to our large range of cooling and heating

products.

Summary of Contents for coolair Braemar Breezair MaglQcool





































































Search results

Summary of Contents for coolair Braemar Breezair MaglQcool

Reviews:

Related manuals for coolair Braemar Breezair MaglQcool

Brands by name

Popular brands

Seeley coolair Braemar Breezair MaglQcool, Service Manual

Search results

Summary of Contents for coolair Braemar Breezair MaglQcool

Reviews:

Related manuals for coolair Braemar Breezair MaglQcool

Brands by name

Popular brands