SeaBotix Generation 2, Service & Maintenance Procedures Manual, Page: 82 / 101

Step 22
Insert second M5x10 socket head button screw securing port
power can end cap to back plane.
Step 23 – 3mm Hex Ball Driver
Tighten 2 M5x10 socket head button screws securing port
power can end cap to back plane.
Step 24
Push o-ring down to starboard power can end cap.
Step 25 – O-ring Insertion Tool
Starting from the back carefully push o-ring into groove
between starboard power can end cap and power can tube
using o-ring insertion tool.
Step 26 – O-ring Insertion Tool
Work o-ring into groove.