Sea-doo 230 Series, Operator'S Manual

Page: 109 / 180

OPERATING MODES
lmo2012-005-026_a
1. Dock icon
3. Touch SET to activate.
4. Apply throttle when ready.
5. TO EXIT:
6. Go back to DOCK menu and touch
CANCEL.
NOTE: This mode remains active un-
til manually cancelled through touch-
screen.
NOTE: This mode is cancelled auto-
matically when engines are turned off.
Sync Mode
All Models
The SYNC mode is controlled by the
iTC (intelligent Throttle Control). When
the SYNC pilot lamp is ON, the iTC
has synchronized both engines (same
RPM's).
The iTC may SYNC the engines when
the following parameters are achieved:
– Engines are above 3500 RPM's.
– Engines are not under acceleration
or deceleration.
Some factors may prevent the SYNC
mode to be active. Here is a brief list:
– Wind
– Water conditions
– Boat inputs from the drive
– Towing.
NOTE: If the iTC does not SYNC the
engines, it should not be seen as a mal-
function.
______________
107