Sea-doo 230 Series Operator'S Manual Download Page 75

Page: 75 / 180

EQUIPMENT

lmo2011-004-021_a

TYPICAL - 230 CHALLENGER

1. Lower glove box
2. Upper glove box

lmo2011-004-022

Operator's glove box is also provided.
It is located just over the information
center cluster.

lmo2011-004-023

6) Console Storage

Compartment

NOTICE

Never operate the boat

with a storage compartment cover
opened.

lmo2007-003-019_a

TYPICAL - 230 WAKE EDITION

1. Glove box
2. Storage compartment

NOTE:

To have access to storage com-

partment, lift seat backrest upward.

lmo2007-003-020

STORAGE COMPARTMENT —
230 WAKE EDITION

7) Bow Storage

Compartment

NOTICE

Never

leave

breakable

objects in the bow storage compart-
ment. Never operate the boat with
the bow storage compartment cover
opened.

A large, convenient storage compart-
ment for anchor, PFD's, towels, etc.

To open, lift the latch ring and open
cover gently until stopped by retaining
shock.

_______________

Summary of Contents for 230 Series





















































































































































































Search results

Summary of Contents for 230 Series

Reviews:

Related manuals for 230 Series

Brands by name

Popular brands

Sea-doo 230 Series, Operator'S Manual

Search results

Summary of Contents for 230 Series

Reviews:

Related manuals for 230 Series

Brands by name

Popular brands