Sea-doo 230 Series, Operator'S Manual

Page: 49 / 180

CONTROLS
1) Steering Wheel
The steering wheel controls the direc-
tion of the boat. Turning the steering
wheel clockwise steers the boat to the
right and inversely.
2) Throttle/Shifter
Control
Shifter Lever
A 3-position lever:
– Forward
– Neutral
– Reverse.
In order to shift:
– Throttle lever must be fully pulled
back (idle speed position).
– Neutral lock detent button must be
pressed (when in neutral).
NOTICE
Do not force throttle
when shifter is in neutral. No warm
up feature is offered or needed.
Forcing the throttle forward be-
yond the stop in when shifter is in
neutral may result in damage to the
shifter/throttle assembly.
lmo2012-005-010_a
TYPICAL
1. Throttle lever must be fully pulled back to
shift (idle speed)
2. Push neutral lock detent button
3. Forward
4. Neutral
5. Reverse
WARNING
Shift lever should only be used
when boat is completely stopped.
WARNING
Always ensure the path behind is
clear of people and objects.
Throttle Lever
When pushed forward, the boat ac-
celerates. When fully pulled back, en-
gines return to idle speed and the boat
is gradually stopped by water drag.
lmo2012-005-011_a
TYPICAL
1. Throttle lever (in idle position)
2. Increase speed
3. Decrease speed
3) Engine Cut-Off Switch
The engine cut-off switch is located on
starboard side, between throttle lever
and driver's console.
WARNING
Keep engine cut-off switch free
from obstructions that could inter-
fere with its operation. The proper
use of the tether cord can prevent
a runaway boat situation. Remove
the tether cord when stopped to
help prevent accidental starting.
The tether cord should be securely
snapped
onto the engine cut-off
switch to allow engine starting.
_______________
47