Sea-doo 230 Series, Operator'S Manual

Page: 52 / 180

CONTROLS
NOTICE
Using the bilge blower for
a prolonged time when the engines
are not running will discharge the
battery.
6) Engine Start/Stop
Buttons
The Start/Stop buttons are located to
the RH side of the toggle switches be-
low the analog fuel gauge.
This is a dual function push buttons.
Used to start as well as to stop en-
gines.
lmo2012-005-007_a
TYPICAL
1. For port engine
2. For starboard engine
3. Analog fuel gauge
Engine Starting and Stopping
Refer to
OPERATING INSTRUCTIONS
for complete procedure to start and
stop the engine.
7) Horn Switch
This is a 2-position toggle type switch.
This switch is located on driver's con-
sole to the left of steering wheel.
lmo2012-005-008_a
1. Horn switch
Raise the switch stem to activate the
horn.
Release the switch stem to stop horn.
1
2
lmo2010-003-021_a
1. ON position
2. OFF position
8) Bilge Pump Switch
This is a 2-position OFF/ON switch.
This switch is located on driver's con-
sole to the left of steering wheel.
50
______________