Sea-doo 230 Series, Operator'S Manual

Page: 118 / 180

MAINTENANCE SCHEDULE
EVERY 25 HOURS
EVERY 50 HOURS
EVERY 100 HOURS OR PRESEASON
EVERY 200 HOURS OR 2 YEARS
A: ADJUST
C: CLEAN
I: INSPECT
L: LUBRICATE
R: REPLACE
D: DEALER
O: OPERATOR
TO BE PERFORMED BY
PART/TASK LEGEND
PROPULSION SYSTEM
Drive shaft
L
(3)
(7)
D
Carbon ring and rubber boot
(drive shaft)
I D
Shifter system, cable and connections I D
Reverse gate
L
(3)
O
Drive shaft/impeller splines
I,
L
D
Impeller boot I D
Impeller shaft seal, sleeve and O-ring
I
(3)
D
Impeller and wear ring clearance I D
Sacrificial anode
(8)
O
(3) Every 10 hours in salt water use.
(7) Lubricate for corrosion protection
(8) Inspect each month (every two weeks in
salt water) and change when necessary.
HULL/BODY
Storage compartment(s) cover lock(s),
latch(es) and hinge(s)
I,
L
(3)
O
Windscreen and fasteners I I O
Deck drains/scupper valve
I
O
Drain plug (inside bilge)
I
(9)
O
Ski/wakeboard attachment (tower,
ski pole or tow hook) and fasteners
I,
L
(3)
O
(3) Every 10 hours in salt water use.
(9) Check for obstructions.
116
______________