Sea-doo 230 Series, Operator'S Manual

Page: 72 / 180

EQUIPMENT
Height Adjustment
230 Wake and 230 Challenger SE
Driver seat can be adjusted in height.
To move the seat up, pull the foremost
lever and release weight from the seat
cushion. When the desired height is
reached, release the lever.
To move the seat down, pull the fore-
most lever and apply weight on the
seat cushion. When the desired height
is reached, release the lever.
Lmo2009-006-001_c
1. Lever
Seat Bolster Position Adjustment
Adjustable seat bolster that allows
different seating positions for low
speeds. It also allows the driver, if ad-
justed in an upright position, to stand
up between the helm and the seat for
low speed operation.
lmo2009-006-012_a
TYPICAL — LIFT SEAT BOLSTER
2) Passenger Seats
Each passenger should be seated
while underway.
There is storage beneath each side
passenger seat cushion.
WARNING
Allow no one to sit on edge of the
boat or to stand up while in op-
eration. Seat and grab handles
should be used in rough waters.
Typical Seat Cushion Opening
To open the storage compartment, pull
on front portion of cushion.
lmo2009-006-008
TYPICAL — SEAT CUSHION OPEN
Side Passenger Seats and Storage
2 1
lmo2009-006-010_a
230 CHALLENGER AND
230 CHALLENGER SE SET-UP
1. Side seats and storage
2. Removable cooler
70
______________