Sea-doo 230 Series, Operator'S Manual

Page: 50 / 180

CONTROLS
Pulling the key from the engine cut-off
switch stops engines.
WARNING
Should the tether cord become
loose or fail to remain on engine
cut-off switch, replace it immedi-
ately.
lmo2010-003-015_a
1. Tether cord clip (switch side)
2. Tether cord
3. Driver's clip
lmo2010-003-016_a
TYPICAL
1. Tether cord clip secured to engine cut-off
switch
Always attach the tether cord to the op-
erator using its Personal Flotation De-
vice or a wrist strap and snap the key to
the engine cut-off switch to be able to
start each engine.
lmo2010-003-009_a
TYPICAL
1. Tether cord
2. Secure tether cord clip to PFD
3. Snap key to engine cut-off switch
WARNING
Directional control is reduced
when throttle is decreased and
lost when engine is off. Always re-
move tether cord when boat is not
in operation.
WARNING
While the engines can be stopped
using the Start/Stop buttons, good
driving habits recommend that the
tether cord also be disconnected
when stopped.
4) Ignition Switch
The ignition switch is located to the
right of steering wheel. It is a 3-posi-
tion switch.
lmo2011-004-016_a
TYPICAL - IGNITION SWITCH POSITIONS
1. OFF
2. ACCESSORIES (lights touchscreen and
radio)
3. ON
48
______________