Scientific SMO1002, User Manual

Page: 67 / 102

67
● Turn the Universal knob to move through character selections. When the desired character is highlighted,
press the Universal knob or press he “InputChar” option button to add it to the specific position in the Name
field.
● Additional selections for BackSpace, DeleteCharacter, and CleanName are available for convenience and
are also accessed using the “Universal” knob in the same manner.
● Press the “Confirm” option button (when you have the Name field completed as desired) to save the file
onto the memory device. After the “Confirm” option button is pressed, a “Data Store Success!” messages
briefly shown and the new folder or file is shown on your USB flash drive.
SAVE/RECALL SETUP
■
Save Setups to Devices
：
The complete setup is stored in nonvolatile memory. When you recall the setup, the oscilloscope will be in
the mode from which the setup was saved.
The oscilloscope saves the current setup if you wait three seconds after the last change before you power off
the oscilloscope. The oscilloscope recalls this setup the next time you apply power.
Fig. 53 SAVE/ RECALL Screen D
Table 42: Save setup to device function menu
User Manual SMO702, SMO1002