66
Recalling Files
The Load button is used to recall your setup files. Once you’ve navigated to the desired file and it’s
highlighted in the main screen area, press the Load option button and the setup is recalled from the USB
flash drive.
Note: The Load button option is disabled when BMP or CSV file types are selected.
Both Directory and Files have Rename and Return option buttons on Page2/2. Use these buttons to give an
existing folder of file a new name or to exit the SAVE/REC ALL screen, respectively.
Creating Folders and Files
Create new folders and files by pressing the New Folder or New File option button. The following screen is
shown on next page.
● The New Filemenu choices and behavior is the same as the New Folder menu. It just has a different
heading. The InputChar option button adds the selected character to the courser position in Name field.
● Move the cursor position in the name field using the “→”and “←” option buttons.
Fig. 52 SAVE/ RECALL Screen B
Fig. 52 SAVE/ RECALL Screen C
User Manual SMO702, SMO1002
Summary of Contents for SMO1002
