Scientific SMO1002, User Manual

Page: 64 / 102

64
If you want to measure voltage parameters, please follow next steps:
1. Press the “MEASURE” button to enter the “Auto measurement” menu.
2. Press the top first option button to enter the “second measurement menu”.
3. Select measure type. If you press the “Voltage” option button, “Voltage measurement” menu will
display on the screen.
4. Press the “Source” option button to select “CH1”, “CH2” according to input signal channel.
5. Press the “Type” option button to select the parameter type that you want to measure. The
corresponding icon and value will display below the measure parameter.
6. Press the “Return” option button to return the home page of “Auto Measurement” menu. The selected
parameter and the corresponding value will display on the top first position of the home page. You can
display the other parameters and its’ value on the corresponding position using the same way, and the
screen can display five parameters at one time.
If you want to measure time parameters using all measure function, please follow next steps:
1. Press the “MEASURE” button to enter the “Auto Measure menu”.
2. Press the top option button to enter the second page of “Auto Measure menu”.
3. Press “All Mea” option button to enter the “All Measure menu”.
4. Press “Source” option button to select input signal channel.
5. Press the “Time” option button to select “On”. Now all of time parameters value will display on the
screen at the same time. ( See Figure)
Fig. 48 Voltage Measurement
Fig. 49 Time Measurement Selection
User Manual SMO702, SMO1002