Scientific SMO1002, User Manual, Page: 81 / 102

81
2. Keyboard Test
Select “keyboard Test” to enter the key test interface, the on-screen lathy rectangle shapes represent the
front panel keys. The shapes with two arrows beside them represent the front panel knobs. The squares
represent the knob presses for scale knobs. Test all keys and knobs and you should also verify that all the
backlit buttons illuminate correctly.
Note:
●When you operate, the screen would display the white (Color LCD) and black (single LCD) repose.
●The tested button or knobs corresponding area would display green (Color LCD) or white (single LCD).
●At the bottom of the screen display “Press‘ RUN/STOP’ Key Three Times to exit” information prompt to
show that press “RUN/STOP” three times for quitting the test .
3. LED test
Select “LED Test” to enter the lighten interface, the on-screen lathy rectangle shapes represent the front
panel keys; the lathy rectangle shapes represent the front panel knobs. The squares represent the knob
presses for scale knobs. The clew words “Press ‘SINGLE’ Key to continue , Press ‘RUN/STOP’ Key to
exit” is displayed, you could press the “Single” button continuously for testing, when buttons are
lighted ,the corresponding area on the screen would display green(Color LCD) or white(Single LCD ).
Fig. 67 Keyboard Test
Fig. 68 LED Test
User Manual SMO702, SMO1002