Scientific SMO1002, User Manual

Page: 21 / 102

21
D) Default Setup
The oscilloscope is set up for normal operation when it is shipped from the factory. This is the default setup.
To recall this setup, press the DEFAULT SETUP button. The options, buttons and controls that change
settings when you press the DEFAULT SETUP button, refer to appendix B.
The DEFAULT SETUP button does not reset the following settings:
● Language option
● Saved reference waveform files
● Saved setup files
● Display contrast
● Calibration data
E) Universal Knob
You can use the Universal knob with many functions, such as adjusting the holdoff time, moving cursors,
setting the pulse width, Setting the Video Linage, adjusting the upper and lower frequency limit, adjust X
and Y masks when using the pass/fail function etc. You can also turn the “Universal” knob to adjust the
storage position of setups, waveforms, pictures when saving/recalling and to select menu options.
F) Vertical System
The vertical control could be used for displaying waveform, rectify scale and position.
Fig. 9
Universal Knob
Volt/div Knob
Vertical Position
Knob
Fig. 10 Vertical System
User Manual SMO702, SMO1002