Schweitzer Engineering Laboratories SEL-167D, Instruction Manual

Page: 60 / 123

To enter Level 1, type the following on a terminal connected to PORT 2:
The response is:
Enter the Level 1 password, e.g., OTTER and press <ENTER>. The response is:
The equal sign and greater-than sign represent the Access Level 1 prompt. Any Level 1
command can be executed from this prompt.
Use a similar procedure to enter Access Level 2:
Type
2ACCESS <ENTER>
and listen for the ALARM relay to drop out and pull in. This
command always pulses the ALARM relay contact for about one second, indicating an attempt
at Level 2 Access. Enter the proper password, e.g., TAIL, when you receive the second
password prompt. After you enter the second password, the relay opens access to Level 2, as
indicated by the following message and the Level 2 prompt:
Any Level 1 or Level 2 command may be executed from this prompt.
Command Format
Commands consist of three or more characters; you may truncate commands to the first three
characters to expedite entry. Upper or lower case characters may be used without distinction,
except in passwords.
Date Code 920326 Commands and Serial Communication
SEL-267D/167D Instruction Manual
3-5