SCHOTTEL SV 1, Manual

Page: 117 / 156

en
9 /
Control System and Electric System (PX 105) FIT--Wa 1159850 Dec./06
48
Display and control field ”EMERGENCY STOP ”
Pos. Operating or display element Function
5 Illuminated push--button EMERG-
STOP (red) with protective cap
Pressing the illuminated push--button sends an emergency stop com-
mand to the controls of the driving motor.
Shines after pressing.
(The illuminated push--button is always active, independent from the
active control stand)
Display and control field ”LAMPS”
Pos. Operating or display element Function
6 Push--button TEST (white) Pressing this push--button, a lamp test in the signal lamps, illuminated
push--buttons and switches is carried out.
Display and control field ”DESK SELECTION ”
Pos. Operating or display element Function
7 Signal lamp ECR DESK IN SER-
VICE (yellow)
The signal lamp shines if the engine room board is active.
8 Illuminated push--button LOCAL
CONTROL (green) with protective
cap
Pressing the illuminated push--button changes the command via the
system onto the local control stand.
Push--buttons in the display and control field ”STEERING” and
”SPEED” are active.
The horn sounds in the previously active board, and the signal lamp
”LOCAL CONTROL” flashes. After 5 s the horn is quiet and the signal
lamp ”LOCAL CONTROL” shines.
9 Signal lamp BRIDGE IN SERVICE
(yellow)
The signal lamp shines if the main control stand board or the chair con-
trol stand is active.
10 Illuminated push--button SEND
COMMAND (yellow)
Pressing the illuminated push--button activates the change--over to
the main control stand board, engine room board and to the chair con-
trol stand boards.
Illuminated push--buttons ”DESK ON” on the boards are flashing.
Display and control field ”STEERING”
Pos. Operating or display element Function
11 Illuminated push--button (yellow) Pressing the illuminated push--button turns the system clockwise as
long as the contact is pressed.
Shines with the local control stand active.
12 Illuminated push--button (yellow) Pressing the illuminated push--button turns the system counter--clock-
wise as long as the contact is pressed.
Shines with the local control stand active.