SCHOTTEL SV 1, Manual

Page: 88 / 156

8 / en STD--Wa 1099237 07/3110 Piping Systems for Hydraulic, Lubrication and Similar Systems 17
When bended during installation, the admissible bend-
ing radius is to be observed.
Sharp bends are to be avoided (Figure 9).
For calculating the length of a hose line which is to be
installed curved, it is to be observed that the connecting
fittings are not flexible. Therefore, the correct dimen-
sioning of the free hose length between the fittings is
essential.
Figure 9
For an appropriate installation of hose lines, fittings are
available with connecting angles of 30
_
, 45
_
and 90
_
.
This ensures that the installation is carried out accord-
ing to specification also in case of confined installation
conditions.
Figure 10