6
496256 Issue 1
Using the Keypad
Figure 1 below shows the keypad in detail.
Figure 1. Keypad
The keypad has the following displays and controls:
Level LEDs
Each red Level LED (Light Emitting Diode) glows
when a Level is set. The LED is dark when the
Level is unset. Note that the installer may program
the system to switch the Level LEDs off after a
short time.
Power LED
The Power LED glows when the system is using
mains power. If the Power LED flashes slowly then
the mains power has been disconnected and the
system is running off the stand-by battery.
LCD
The system displays information and instructions
through the LCD (Liquid Crystal Display). The
system displays which detector has been triggered
by giving its zone number. You can use the keypad
to give detectors
meaningful
zone names
. The
system will then display the names when the
detector is triggered (ask your Installer for details).
Illuminated keypad
The keypad can be set up so that the keys are
illuminated from behind.
Level Setting Keys
Use these keys to set individual Levels. (Note that
you will have to use your access code first.)
32 character by two line
Liquid Crystal Display
(LCD)
Optional programmable
panic alarm keys. Press
keys 1 and 3 together
Optional programmable
control function keys.
Press keys 7 and 9
together.
Menu and Enter keys
Levels LEDs (Set or
Unset)
Level setting keys
Keyboard with
backlit soft rubber
keys
Power
1. Introduction
