22
496256 Issue 1
5.
Press Enter.
The display shows (for example):
SET DATE =
26 Oct
6.
Press A or B to change the month.
The display shows (for example):
SET DATE =
26 Nov
7.
Press Enter.
The display shows:
SET DATE =
26 Nov
8.
Press A or B to change the day.
The display shows (for example):
SET DATE =
05 Nov
9.
Press Enter.
The display shows:
SET TIME
BACK 1 HOUR
10. If necessary press A or B to select either "No Change" or "Forward 1
Hour"
11. Press Enter to store the change.
The display shows:
6: SET
TIME & DATE ?
Changing Area and Zone Names (Menu 7)
The system allows you to store names for each detector zone. In addition,
the installer groups detector zones into areas, and you can give each area its
own name. The display shows the names when the system raises an alarm,
or if you are using some of the special functions. Each area or zone name
can be a maximum of 16 characters long, including spaces and punctuation
marks.
Although the keypad only shows numbers, the system lets you enter letters
one at a time by pressing a number key repeatedly until the display shows
the letter you want. Each number key gives its own number and three letters
of the alphabet.
The figure below shows which letters belong to each number key. When
keying in a name, find the letter you want on Figure 2, then press the key
shown the correct number of times. Use the right arrow key to move the
cursor to the next space for a new letter.
4. Special Functions
