16
496256 Issue 1
4. Special Functions
Introduction
Some users may be allowed to perform a number of other functions, apart
from setting and unsetting the system. These functions are:
Setting the system so that some zones are bypassed or
omitted
.
Turning the
chime
function on or off.
Testing the zones and sounders.
Setting the time and date on the system's internal clock.
Changing zone names.
Reading the system log.
To use these functions you must key in your access code and then press
Menu followed by a number. In addition, the alarm system supervisor (see "6.
Supervisor") must program the system to allow each user access to indi-
vidual menu number. The rest of this section assumes that the user has
access to the functions described.
Omitting Zones (Menu + Level)
Your system may be programmed so that you can omit individual zones
when setting the system. This function is useful, for example, if you have to
bypass a detector while decorating. Ask your Installer which zones can be
omitted. Note that omission is not permanent. You must omit the zone every
time you set the system.
To set with a zone omitted:
1.
Key in your access code.
2.
Press
Menu
.
The display shows:
1: SETTING
WITH OMISSIONS
3.
Press Enter.
The display shows:
SET WHICH LEVELS
A
4
Use the Level keys to display the Levels you
wish to set.
5.
Press Enter.
The display shows:
OMIT ZONES?
